Piloted Valve Solutions

For dishwashers and other appliances, our piloted valve solutions enhance efficiency and performance. They are the top choice for OEMs around the world for both residential and commercial applications.

S-101 Series Water Valve

S-101 Series

S-101 Series Water Valve

Aplicación: Commercial Cooking, Refrigeration, Laundry, Dishwashing and Water Purification

El Robertshaw^® S-101 Series Water Valve is a single solenoid valve for dishwashing machines, coffee brewers, cappuccino machines and tea brewers. The S-101 has a robust 3/8” brass inlet connection. The S-101 features the low profile Hydra^® solenoid produced using a fully automated arc weld process to eliminate open circuit concerns in the field.

Características y ventajas:

Pilot-operated diaphragm provides high flow capacity with minimum power requirements
Soft close operator design reduces water hammer and extends valve life
Encapsulated coil provides high mechanical and dielectric strength, and is moisture resistant
Body material withstands a variety of harsh water conditions
Suitable for applications using water at temperatures up to 160°F (71°C)
Tested and field proven EPDM materials for North American water conditions
Multiple mounting bracket and inlet screen options available

Especificaciones:

Terminals: 1/4″ (6.35mm) Male spade or RAST 2.5
Electrical Rating: 24V AC, 120V AC, 240V AC, 24V DC
Body Material: Polypropylene
Inlet Size: 3/8″ FNPT
Outlet: 3/8″ or 1/2″ ID hose barb
Operating Pressure: 20 PSI to 120 PSI
Flow Rate: Various options from 2.5 to 16 LPM
Operating Cycle: 1-1/2 minutes ON, 3 minutes OFF
Ambient Temperature: 77°F (25°C) maximum
Differential: 175 PSI maximum
Coil Insulation: UL rated Class A (105°C)

Certificaciones de la Agencia:

UL MH6499
CSA
ANSI/NSF Standard 169

Descargar hoja de especificaciones

S-102 Series Water Valve

S-102 Series

S-102 Series Water Valve

Aplicación: Commercial Cooking, Refrigeration, Laundry, Dishwashing and Water Purification

El Robertshaw^® S-102 Series Water Valve is a general purpose valve commonly used in appliance and commercial applications. The S-102 has a cost effective 3/4” inlet connection. The S-102 features the low profile Hydra® solenoid produced using a fully automated arc weld process to eliminate open circuit concerns in the field.

Características y ventajas:

Pilot-operated diaphragm provides high flow capacity with minimum power requirements
Soft close operator design reduces water hammer and extends valve life
Encapsulated coil (HB or V0 rated) provides high mechanical and dielectric strength, and is moisture resistant
Body material withstands a variety of harsh water conditions
Suitable for applications using water at temperatures up to 160°F (71°C)
Tested and field proven EPDM materials for North American water conditions
Multiple mounting bracket and inlet screen options available

Especificaciones:

Terminals: 1/4″ (6.35mm) Male spade or RAST 2.5
Electrical Rating: 24V AC, 120V AC, 240V AC, 24V DC
Body Material: Polypropylene
Inlet Size: 3/4″ – 11-1/2″ NH thread
Outlet: 3/8″ or 1/2″ ID hose barb
Operating Pressure: 20 to 120 PSI
Flow Rate: Various options from 2.5 to 16 LPM
Operating Cycle: 1-1/2 minutes ON, 3 minutes OFF
Ambient Temperature: 77°F (25°C) maximum
Differential: 175 PSI maximum
Coil Insulation: UL rated Class A (105°C)

Certificaciones de la Agencia:

UL MH6499
CSA
ANSI/NSF Standard 169

Descargar hoja de especificaciones

LA DIFERENCIA DE ROBERTSHAW

Con una experiencia inigualable en control de flujos, capacidades de desarrollo rápido, fabricación estratégicamente ubicada y un equipo comprometido impulsado por la colaboración y la innovación, le ayudaremos a conseguir resultados extraordinarios.

Ver cómo